Applies to: companies on which a super user has also switched Drop trailer management on (release 2.60.13). Warehouse staff run the gate and the yard; a user tied to one client only reads their own trailers.
Many yards take drop trailers: the carrier brings a trailer, leaves it and goes. Later the Warehouse unloads it, tells the carrier it is empty, and the carrier comes back for it. Dock scheduling books the truck; drop trailer management follows the trailer, from its check-in at the gate to its check-out.
The words to know:
Live, drop, pick up:live means the driver waits at the door. A drop means the driver leaves the trailer. A pick up means the driver comes for a trailer that is already here. Drop and pick up is both in one visit.
Stay: one trailer's time in the yard, from check-in to check-out. It has a number such as VIS-0000123. A booking is a promise about a time; the stay is the trailer, and it goes on after the driver has left.
State and place are separate. The state says what has been done to the trailer: Waiting for a door, Being unloaded, Unloaded, Empty, ready for pickup, Gone (for a trailer to be loaded: Waiting empty, Being loaded, Loaded, Loaded, ready for pickup). The place says where it is: a spot such as Y-07, or a door. Taking a trailer to a door and back never moves its state.
Free time and time to collect: two clocks. The free time is yours: 48 hours from check-in to the moment the trailer is ready. The time to collect is the carrier's: 24 hours from the moment it was told the trailer is ready. Hours on days the Warehouse is closed do not count (see "The two clocks").
No appointment: a trailer that comes unannounced is let in and marked No appointment, so the yard always matches the System.
Booking a drop or a pick-up
On the booking panel the question How is the truck coming? has four answers: Waits at the door, Drops the trailer, Picks up a trailer and Drops and picks up. Waits at the door is the choice until you change it, so booking works as it always did. A drop or pick-up shows on the board in its own colour with "Drops a trailer" or "Picks up [trailer]", and the carrier Email and the gate pass say "trailer drop". A drop still takes a short slot at a door in this release; no door work happens in it.
A drop is finished when the driver leaves the trailer: on the gate desk, or on the truck panel (Arrived then Trailer dropped). That frees its Purchase orders, so the unload is booked afterwards, on a door, as a normal truck. You cannot book the unload together with the drop in this release: a document is held by one active appointment at a time.
Trailers on site
Yard > Trailers on site lists every trailer in the yard. Above the list: on site, loaded and waiting (need a door), empty and ready for pickup, past free time, the average time on site over 7 days and the oldest trailer; a ring by state and the age of the trailers (under 1 day, 1 to 2, 2 to 4, over 4). Hide KPIs gives the height back.
Each row has the trailer and its type, the carrier, a state pill, where it is, what is on it (the Purchase orders, with pallets), the time on site and a clock chip: the free time left (2 h left, Over by 50 h) and, once the trailer is ready, the carrier's time (1 h 15 of 24 h, Late by 23 h 30). Filters: all, inbound, outbound, empty pool (a spare trailer left on purpose with no order), over free time, no appointment, not found, ready for pickup. A loaded refrigerated trailer that waits longer than the alert (4 hours) shows an amber and then a red chip; the chip says there is no power or temperature reading. Click a row to open the trailer.
The gate desk
Yard > Gate desk is the clerk's screen for the day.
Coming in lists today's bookings still to come, and the trucks at the gate. Click one and its details fill the check-in form. Find a booking looks for a booking by number, carrier or document, three days either side of today, for a truck that is early or late.
Not expected: check in with no appointment is the path for a trailer with no booking. It asks for the same facts; the stay is marked No appointment. When the setting Require an appointment is on, the clerk must give a reason.
The check-in form takes the trailer number, trailer plate, tractor plate, driver, seal (and its state), yard spot, carrier, truck type, direction, whether it is loaded or empty and who owns it, the photos of the seal and the trailer, and the driver's signature. The driver's licence and RFC are there too, for the Carta Porte. Check in the trailer creates the stay, marks the booking arrived and links the two. The free time starts now: "Free time starts now: 48 hours to unload, not counting closed days."
Drops the trailer also records that the driver left, which completes a drop booking. Otherwise press Trailer dropped later. A drop-and-pick-up booking stays open after the drop and stays listed at the gate as a check-out: choose it, pick the trailer that is leaving, and its check-out completes the booking. If that is missed, finish the booking on the dock schedule with Trailer picked up.
Refuse this trailer checks it in and out in one go with the reason (a broken seal, a wet load). The clocks never start. Its booking is cancelled with that reason, which frees the door and the documents, and no Email goes to the carrier.
Gate out (the second tab) lists the trailers on site. The clerk types the number read on the trailer; a different number is refused ("The number on the trailer is , but this stay is for trailer [Y]. Check the number on the trailer") so the wrong trailer is never hooked. Gate out records the collecting driver, tractor, seal and signature, ends both clocks and closes the carrier's pick-up booking. A trailer with a door booking still open cannot leave until that booking is finished or cancelled. For a pick-up booking, choose it under Coming in, then pick the trailer that is leaving: the booking is tied to that trailer, with its documents and client, only when the check-out goes through. A check-out that is refused (a wrong trailer number, a door booking still open) leaves the booking exactly as it was. A drop booking still at the gate when its trailer leaves is finished by the check-out too.
A trailer already on site is refused however its number is typed: "Trailer is already on site since [date] (stay [VIS-…]). Check it out first or open that stay."
The trailer page
Click a trailer to open its page: its chips, the two clock bars, a timeline from the booking to now, the documents on it (each a link), the gate crossings with driver, tractor, plates, seal and the photos and signature, and the times (waiting, at the door, from empty to told). The buttons show only the steps that apply now:
Move to another spot takes a typed spot or a door.
Send to door (also on the Yard tab of the booking panel, which lists the trailers waiting for a door) books an ordinary internal appointment for the trailer with its Purchase orders, carrier and contact filled in and the usual three options. When that booking is started and completed at the board, the stay follows: Being unloaded, then Unloaded.
Mark empty confirms an unloaded trailer is empty (swept, nothing left inside). It is a person's confirmation on purpose, and the trailer becomes Empty, ready for pickup. A loaded trailer to leave sealed has Mark ready, which asks for the seal number.
Start unloading (Start loading for a trailer to be loaded) and Unloading is done (Loading is done) are for a trailer with no door booking doing it.
Tell the carrier, Check out at the gate, Adjust a clock, Yard check (the trailer is where it should be, in a different spot, or not found) and Close by the office (a trailer that left unseen: a reason is required, and its departure time is when it was last seen, not today). A stay with a booking still open (a door booking, a pick-up or a drop at the gate) cannot be closed this way: finish or cancel that booking first, so it does not keep its slot and its documents for a trailer that is gone.
Link to appointment ties a booking found later to a trailer that came with none. Type the whole appointment number: part of a number, a carrier or a document number is never taken for the booking. Its documents and client come onto the stay. A booking goes with one trailer still in the yard, and only a pick-up or a drop-and-pick-up booking can collect one. A booking tied by mistake is taken off with Unlink, on its line on the trailer page (office staff only): the documents only that booking brought come off with it, the client of the stay is worked out again, and the booking itself is not changed. A booking that works the trailer at a door has no Unlink: finish or cancel it on the dock schedule.
Add a document puts a purchase order, found by its number, on a trailer (this is how an empty spare is given to an order); a document can be taken off again. Only Purchase orders can be added from this page in this release. The check-out on this page records the driver, tractor and seal; the driver's signature is taken on the gate desk.
The two clocks
The free time and the time to collect count hours worked out from the moment, so a clock change cannot move them, and hours on days the Warehouse is closed do not count. A day is closed when the dock hours (the ones the board uses: your capacity rules and the Calendar settings) have no opening hours on it, such as Saturday and Sunday under Monday to Friday hours, or when a blackout for the whole Warehouse covers all of it. A lunch break, a closed door or a blackout on one door closes nothing. A trailer dropped on Friday afternoon is therefore not over its 48 hours on Monday morning. Switch Business_Yard_TrailerClockSkipsClosedDays off for a company whose contract counts weekends.
The hours are copied onto the stay at check-in, from the carrier's own terms or the company defaults, so changing a default never changes a stay that already began. A trailer from a pool (a spare with no order) and a customer's own trailer have no free time clock. Adjust a clock waives hours (or adds them) with a reason, which stays on the timeline with the user's name. The System never charges anything: it records the facts (check-in, ready, told, check-out, the hours that applied) and the charging is done elsewhere.
Tell the carrier
Yard > Tell the carrier lists the trailers that are ready, by carrier: not told yet, told and waiting, or late. Click one to see the notice before it goes: to whom, where the address came from (the booking's contact, else the carrier record, else typed by you), and the exact words in the company's language. Send the notice queues the Email through the company's normal Email sending (queued is not delivered). I phoned them records that you told the carrier another way, with no Email. Nothing is sent by itself.
The notice names the trailer and its plate, the stay number, the spot, the Warehouse and its address, the time to collect it by and the phone to call. It does not carry purchase order numbers, client names or contents.
A second notice within 15 minutes needs a confirmation; any later one only shows a warning that the carrier was told already. The first notice starts the carrier's clock and later ones do not move it.
If the Email cannot be queued you are told so, nothing is recorded as sent, and a failed-notice line is written on the timeline.
The setting Business_Yard_SendPickupNotices allows the notice Email, apart from the booking emails. I phoned them is always open, so a company that has not switched the Email on can still tell its Carriers and start their clock. A reply to the notice goes to the company's own sender address; the body gives the Warehouse phone.
Carrier terms
Yard > Carrier terms gives a carrier its own free hours and hours to collect, instead of the company numbers; a blank cell uses the company number. The terms are read when a trailer is checked in.
What a client user sees
A user tied to one client sees only the trailers that carry their freight, and only their own documents and bookings on a trailer that holds several Clients' freight. They see the trailer page without any button, no gate desk, and no carrier terms. The trailer's history shows what happened to the trailer, without office notes or who did it, and each gate crossing shows its time, plates and seal, without the driver's details, signature or photos.
Limits of this release
The spot is typed text. There is no yard map, no board of spots and no yard moves; the Handheld is not involved.
The notice is never sent automatically, and there is no reminder.
A drop booking still uses a door slot for its short window.
The unload cannot be booked at the same time as the drop.
No sample trailers are loaded by the release; the first stays are the ones your gate checks in.
A trailer is known by its number and its carrier. The same number typed with a different or blank carrier counts as another trailer, so choose the carrier from the list.