Skip to content
P4 Software P4 Software / logisticaHQ-en

Add these docs to Claude

Ask Claude questions about these docs. Claude reads the published pages and links you back to them. Copy this address:

https://p4-software.opendocs.page/mcp

In claude.ai or Claude Desktop: open Settings, then Connectors, choose Add custom connector and paste the address.

In Claude Code, run:

claude mcp add --transport http docs https://p4-software.opendocs.page/mcp

Counts due

Counts due
← Handheld cycle count

Counts due lists the Bins and pallets whose stock is due for a Cycle Count, by its ABC code. Bins holding the Products you pick the most are counted often, and the slow ones less often. Counting a bin or pallet on the gun takes it off the list, so the list is always the work still to do. Tick the ones to count and Assign them to your counters; Count assignments and Count progress explains how.

Open it from Analytics > Cycle Count > Counts due. It is for office Users; a user who belongs to a client cannot open it.

When a bin or pallet is due

  • Each bin with stock lying loose in it, and each pallet (LPN) with stock on it, is one line. A bin that holds only pallets is counted through its pallets.
  • Bins in a Quarantine or Production area zone are left out, and so are the pallets standing in one: held stock and stock waiting for production are not counted on this rhythm. A pallet not put away yet is listed.
  • It takes the best ABC code among the Products it holds: a bin with one A product and three D Products is an A bin. A product the nightly ranking has not reached yet (created today) counts as F until tonight.
  • Its code says how often it is counted:
CodeCounted every
A30 days
B60 days
C90 days
D120 days
E180 days
F365 days

A bin or pallet is due when its last count is that many days old. One that was never counted is due now. The first time you open the list most Bins will show Never counted; the list puts the A Bins first, so start there.

The screen

  • Four tiles: Due now (with how many were never counted), Overdue by more than 7 days (with the oldest), Assigned, not counted yet (with how many people have them and how many are late), and Counted this week (since Monday).
  • Count every: the days for each code, with a link to change them in Configuration.
  • Pills All, A to F narrow the list to one code. Warehouse and Client narrow it to one Warehouse or to the Bins and pallets holding one client's stock.
  • All, Not assigned and Assigned narrow the list by whether someone has the count, and Assigned to narrows it to one person (Anyone shows everyone).
  • Count progress in the header opens Count progress, where you follow the assigned counts up.
  • The list comes in the order to work it: never counted first (A before F), then the most days overdue, then those due today, then those awaiting approval. Bins with the same urgency follow the walking order. Click a column header to sort another way; Export saves the list to Excel.
ColumnWhat it shows
LocationThe bin code, or the pallet's LPN and the bin it stands in. Click it to open the bin or the LPN.
ZoneThe bin's zone.
ABCThe code the bin or pallet takes (the best of its Products).
HoldsThe SKU with the most units there, and how many other Products.
UnitsUnits on hand there.
Last countedThe day of the last count, or Never.
Count dueNever counted or more than 7 days overdue (red), 1 to 7 days overdue (amber), Count due today (blue), or Counted, awaiting approval (grey).
ClientThe client with the most units there, and how many other Clients.
Assigned toWho has the count, the assignment number and its count-by date (CNT-0000231 · count by Oct 30), in red when late (CNT-0000224 · 2 days late). A task given out before assignments existed shows its TSK- number. Not assigned when nobody has it.

Assigning counts

Tick the Bins and pallets to count (the box in the header ticks the whole page). A bar shows how many are ticked, their units, their Zones and the first and last stop of the walk, with Print selected and Assign. Assign opens the Assign counts dialog: one person or split between people, a count-by date, a priority, instructions for the gun, and Hold the stock from picking until it is counted (off unless you tick it). Each person gets a count assignment (CNT-) and each location arrives on their gun under My tasks. A location someone already has to count is left out and named. The whole flow, the count sheet and Count progress are on Count assignments and Count progress.

Counting

Count the bin on the gun with Cycle count by bin or Cycle count marked bins; for a pallet, scan its LPN. The count date is saved, and the bin or pallet leaves the list the next time you press Refresh. Nothing else is asked of the operator. Counting a pallet counts only that pallet: the bin it stands in stays on the list for its loose stock until the bin itself is counted (scan the bin).

  • Cycle count by product counts one product, not the whole bin, so it does not take a bin off the list, unless counts need approval and its differences are approved: approving a count takes the bin or pallet it counted off the list.
  • Where counts need approval, a count that found differences shows as Counted, awaiting approval until someone approves it in Collaboration > Unapproved CCs. Then it leaves the list. A count with no differences leaves the list at once.
  • Counts due never marks a bin as count required. That flag holds the bin's stock back from picking, so the list never stops picking.

Every count is now kept: when it was done, by whom, and what was found. To see the counts of a bin or pallet, open Count history, or the History tab of the bin or the LPN.

Print list

Print list opens a count sheet as a PDF in a new tab, ready to print or save. It holds exactly the lines on screen: the pill you pressed, the Warehouse and client you chose, and anything you typed in the search box. The sheet is in walking order (Warehouse, zone, then the bin's sequence number, then the bin code) and grouped by zone. Each location shows a barcode of its code, its ABC code, what it holds, the units, when it was last counted and how overdue it is, with a blank Counted quantity box to write in. Every page ends with Counted by, Date and Signature lines. The sheet prints in your language. Choose the Warehouse and a code first to print one round of counting.

Print selected, in the bar that appears when you tick rows, prints the same sheet with only the ticked Bins and pallets.

If your browser blocks the new tab, the PDF is downloaded instead.

To change how the sheet looks (the logo, the columns, the wording), open Setup > System > Tenant, Document Printing, and edit Counts due sheet in the report designer. Every sheet printed after that uses your design; Reset goes back to the standard one.

Settings

In Setup > Configuration, Business › Products, under ABC codes:

SettingDefaultWhat it does
Count Intervals30,60,90,120,180,365The days between counts for codes A, B, C, D, E and F, separated by commas. Each must be a whole number from 1 to 3650; a value that cannot be read is ignored and the defaults are used.

How Products get their codes is on the ABC codes page.

Troubleshooting

What you seeWhy, and what to do
Almost every bin says "Never counted"Nothing has a count date yet. Count the A Bins first (they are at the top), then work down.
A bin counted today is still on the listPress Refresh. If it is still there, it was counted by product and the count was not sent for approval (count it by bin), or its count is waiting for approval (the line says so).
A bin holding pallets is not listed, but its pallets areStock on pallets is counted pallet by pallet; the bin itself is listed only for stock lying loose in it.
A bin with stock is never listedIts zone is a Quarantine or Production area zone, which the list leaves out (the zone's type is on its details). Otherwise it was counted within its interval and is not due yet.
A slow bin is counted every 30 daysIt holds at least one A product. Move that product, or check its ABC code on the product.
The screen says you cannot see the counts dueThe list is for office Users; a user who belongs to a client cannot open it.

Was this page helpful?