Skip to content
P4 Software P4 Software / logisticaHQ-en

Add these docs to Claude

Ask Claude questions about these docs. Claude reads the published pages and links you back to them. Copy this address:

https://p4-software.opendocs.page/mcp

In claude.ai or Claude Desktop: open Settings, then Connectors, choose Add custom connector and paste the address.

In Claude Code, run:

claude mcp add --transport http docs https://p4-software.opendocs.page/mcp

Count assignments and Count progress

Count assignments and Count progress
← Counts due

A supervisor can give the Bins and pallets that are due for a count to the people who count them, and then follow the work up. Each person gets a count assignment with a number (CNT-0000231), a count-by date, a priority and instructions, and each location arrives on their gun as an ordinary Cycle Count task under My tasks. Count progress then shows what was assigned, what is counted, what is late and what each person found.

You assign counts from Counts due (and from Cycle Count Bins, Cycle Count LPNs, Inventory and Bulk inventory). You follow them up in Analytics > Cycle Count > Count progress. Both are for office Users; a user who belongs to a client cannot open them.

Assigning counts

  1. Open Analytics > Cycle Count > Counts due and tick the Bins and pallets to count (the box in the header ticks the whole page). A bar shows how many are ticked, their units, their Zones and the first and last stop of the walk, for example 6 selected · 4,234 units · Zones A, B · walking order A-01-001 → B-02-011.
  2. Press Assign 6…. The Assign counts dialog opens.
  3. Choose Who counts: One person, or Split between people and add each person. Each name shows what that person already has, for example 12 open · 3 late, so you can spread the work.
  4. When you split, choose How to split: Evenly, in walking order (each person gets one stretch of the walk, the shares differ by at most one location) or By zone, so each person stays in one area (whole Zones, the largest first, each to the person with the fewest locations so far).
  5. Check What each person gets: the number of locations, the units and the codes. Under Already given out, left out are the locations someone already has to count, with the person and the number (CNT- or TSK-). They are not assigned again.
  6. Set Count by (today plus three days unless you change it). The count shows as late after this date.
  7. Choose the Priority: Normal, High or Urgent. The gun lists Urgent tasks first.
  8. Type any Instructions. They are shown on the gun with each task.
  9. Leave Hold the stock from picking until it is counted off for routine counts. Turn it on only when you think the quantity is wrong: the locations are marked count required, and picking skips them until they are counted.
  10. Press Assign. A message lists the assignments created (one per person), and the list is read again so the Assigned to column fills in.

Each person gets one count assignment holding their locations in walking order, and one Cycle Count task per location on their gun, exactly the task Collaboration › User tasks has always made. Nothing changes on the gun: the person counts the location with Cycle count by bin from My tasks, as before.

The same dialog opens from Assign on Cycle Count Bins and Cycle Count LPNs (there Hold starts ticked, because those locations are already held for a count, unless your permissions don't include holding stock from picking) and from Cycle Count on Inventory and Bulk inventory (Hold starts off). Every count you give out has an assignment.

What Counts due shows

  • Assigned to column: the person, the assignment number and its count-by date (CNT-0000231 · count by Oct 30), in red when it is late (CNT-0000224 · 2 days late). A task given out before assignments existed shows its TSK- number. Not assigned when nobody has it.
  • All, Not assigned and Assigned narrow the list, and Assigned to narrows it to one person (Anyone shows everyone).
  • The third tile is Assigned, not counted yet: how many locations are given out and still open, with how many people and how many are late.
  • Print selected prints the Counts due sheet of the ticked rows only; Print list still prints everything on screen.
  • Count progress in the header opens Count progress.

When a location counts as done

  • A count on the gun completes the location whoever counts it. It shows on the assigned person's progress, and on the counter's own counts when the counter is someone else. The location's task leaves the assigned person's gun at the same moment, so nobody is sent to count it again.
  • If a person had the task open on the gun when it was taken away (moved to someone else, or counted by someone else), their count is still saved, without the task.
  • A bin count completes the bin's location and the pallets in that bin it counted. A pallet count completes only that pallet; it does not complete its bin, because it did not count the loose stock.
  • A count by product counts one product, not the location, so it completes nothing. It still shows in Count progress as a count.
  • A count that waits for approval still completes the location: the count was done; the approval shows in Count history.
  • A location whose bin or pallet was deleted (a pallet is deleted when it is emptied) no longer counts as open or late on Count progress and is left off the count sheet; Reassign or Send again closes it.

The count sheet

In a person's panel (below), Print open list opens one PDF per assignment that still has open locations. Each sheet shows the assignment number as a barcode, who counts it, the count-by date (in red when late), the priority, the number of locations and units, and the instructions. Then come the open locations in walking order, grouped by zone: the stop number, the code with its barcode, the ABC code, what it holds, the units and a wide Counted quantity box to write in. A notes box and Counted by, Date and Signature lines close it. The sheet prints in your language.

  • The ABC code, what it holds and the units are read from the location's stock when you print, not when it was assigned. A bin counts the stock lying loose in it and a pallet its own stock, as on Counts due, so a bin and its pallet on one sheet are never added twice.
  • Only open locations print. When everything is counted the sheet says so.
  • To change how it looks, open Setup > System > Tenant, Document Printing, and edit Count sheet in the report designer. Reset goes back to the standard one.

Count progress

Open Analytics > Cycle Count > Count progress, or press Count progress on Counts due. Choose the Period (Last 7 days, This month, Last month or Custom…, then a From and a To day, both included) and the Warehouse.

TileWhat it counts
AssignedLocations given out in the period, with how many assignments and people. A location moved to someone else counts once, for the new person.
CountedOf those, the ones counted (by anyone), and the share of what was assigned.
Still openOf those, the ones not counted yet, with how many are past their count-by date.
Matched on the first countThe share of the period's counts that found no difference when they were counted, before any approval. Opening stock loaded by an inventory import is left out.
Own countsCounts made without an assignment of the counter's own: a location nobody assigned, or someone else's.
  • By person: one row per person with Assigned, Counted, a progress bar, Still open, Late, With differences, Matched first count, Own counts and Last count, and a Total row. Click a name to open that person's panel. Export saves this table as a CSV file.
  • Counts per day: a bar per day, counts of assigned locations and own counts stacked.
  • Late assignments: every assignment with a location past its count-by date, whatever the period, the most days late first: the number, the person, 5 of 9 locations open, the count-by date, the days late and the Zones, with Reassign….
  • Print makes a PDF of the tiles, the by-person table and the late assignments (Letter, landscape). To change how it looks, edit Count progress in Setup > System > Tenant, Document Printing.

Count progress shows how each person works, so it follows the setting that keeps people figures for administrators (it is on unless an administrator turned it off in Configuration). While it is on, only administrators can open Count progress; anyone else sees Count progress shows people figures, which this company keeps for administrators.

One person's counts

Click a name in By person. A panel opens with six figures (Assigned, Counted, Still open, Late, Differences, Own counts) and the tabs All, Open, Counted and Own counts. Open and late locations come first, then the latest. Each row shows the location (Bin · zone C, Pallet in D-01-001), the assignment number and count-by date, and the result:

ResultMeaning
2 days late (red)Not counted, past its count-by date.
Still open (blue)Not counted yet, not late.
Matched (green)Counted with no difference.
+3 units / −2 units (amber)Counted with a difference; the line under it says what was expected and what was found.
Counted by Luis VegaSomeone else counted this person's location.
Reassigned to Carla NúñezMoved to another person, who now owns it.
  • Print open list prints the count sheet of each of the person's assignments that still has open locations.
  • Reassign open counts… moves all of the person's open locations to someone else.
  • Send again appears on an open location whose task is no longer on the gun (deleted another way). It makes the task again with the assignment's priority and instructions, and says Sent to the gun again as TSK-0000046.

Reassign

Press Reassign… on a late assignment, or Reassign open counts… in a person's panel. The dialog says how many locations are still to count and who has them. Choose the person in Give them to and the Count by date, then press Reassign.

  • The new person gets a new assignment (a new CNT- number) with the same priority, instructions and hold choice, and a task per location on their gun. The old tasks leave the old person's gun.
  • The old assignment keeps the locations as Reassigned to the new person; they count for the new person only.
  • Counts already done stay with whoever did them. A location counted while the dialog was open is left where it is, and so is a location whose bin or pallet no longer exists (it is closed).
  • You cannot reassign counts to the person who already has them.
  • When it is done, a message lists the new assignments and then each location that was not reassigned, with its reason: counted meanwhile, moved to someone else, closed because its bin or pallet no longer exists, or not found. When none moved, it is titled Nothing was reassigned.

Users with a restrictive permission module

Administrators see the new screens at once. A user whose permission module is Restrictive can call only the paths listed in their module.

  • Giving out counts keeps working with no Setup. A module that let its Users give out cycle counts from Inventory, Bulk inventory or Cycle Count Bins (it lists /api/UserTaskApi/CreateUserTaskBatch, or a path with % that covers it, and /odata/User for the list of people) also lets them use the Assign counts dialog, from every list that opens it, Counts due included.
  • Hold the stock from picking also needs /api/BinApi/MarkCountRequired, the path that marks locations count required. Without it, the dialog opens with Hold unticked and greyed out, under the line Your permissions don't include holding stock from picking., wherever it is opened from (on Cycle Count Bins and Cycle Count LPNs too, where Hold otherwise starts ticked). A module whose Users could already take locations off those lists with Clear lists that path already.
  • For the new screens, and for Reassign, Send again and the count sheet, an administrator adds, in Setup > System > Modules, the menu entries Count progress and Count history (Analytics › Cycle Count) and these paths:
PathUsed by
/api/CountAssignmentApi/%Reassign, Send again, the count sheet (and Assign counts, for a user who never gave out counts before)
/api/CountProgressApi/%Count progress, the person panel and its PDF
/api/CountHistoryApi/%Count history and the History tabs

Without them the user sees User [name] is not authorized for [/api/CountProgressApi/Get].

Users with a permissive permission module

A Permissive module lists the paths its Users may not call. A module that kept its Users from giving out counts the old way keeps them from the new dialog too:

  • Blocking /api/UserTaskApi/CreateUserTaskBatch (creating count tasks) blocks Assign counts: its preview, Assign and the list of people.
  • Blocking /odata/User (the user list) blocks the dialog's list of people.
  • Blocking /api/BinApi/MarkCountRequired blocks Hold the stock from picking: the dialog opens with Hold unticked and greyed out.

Either of the first two also blocks the list of people in Reassign and Reassign open counts… on Count progress, which read the same list.

A path with % that covers one of these blocks it the same way.

Troubleshooting

What you seeWhy, and what to do
Someone already has every one of these locations to count, so there is nothing to assign.Every ticked location has an open assignment or an open Cycle Count task. Look at the Assigned to column; reassign those counts or wait for them.
None of the [6] chosen locations can be assigned: each already has an open count with someone. Finish or reassign those counts first.Another supervisor assigned them a moment ago. Press Refresh to see who has them.
[A-01-001] no longer exists, so nothing was assigned. Reload the list and try again.A bin or pallet was deleted while you were assigning (a pallet is deleted when it is emptied). Nothing was created; press Refresh and assign again.
Someone else is assigning or moving counts right now. Wait a few seconds and try again.Two supervisors pressed Assign or Reassign at the same moment. Press it again.
The count-by date [2026-10-25] has already passed. Choose today or a later day.Pick today or a later day.
[A-01-001] on [CNT-0000231] is already assigned to [Ana Ruiz]. Choose someone else.You chose, in Reassign, the person who already has the counts.
Nothing was reassigned: the chosen counts have already been counted, moved to someone else, or closed because their bin or pallet no longer exists. Reload the list to see them as they are now.Everything you chose changed since you opened the dialog. Refresh to see it as it is now.
Nothing was reassigned: the chosen counts were counted meanwhile.The locations were counted while the dialog was open. Nothing is left to move.
[A-01-001] on [CNT-0000231] no longer exists, so there is nothing to count; the line is closed.Send again or Reassign found the bin or pallet gone. The location is closed and leaves the open counts.
[A-01-001] on [CNT-0000231] is still in the task list of [Ana Ruiz] as [TSK-0000045]. There is nothing to send again.The task is still on the gun; Send again is only for a task that vanished.
[Ana Ruiz] no longer exists as a user, so the count cannot be sent again. Reassign it to someone else.The user was deleted. Use Reassign open counts… to give the location to someone else.
That count assignment no longer exists. Reload the list and try again.The sheet was asked for an assignment that is not there. Close the panel and open it again.
Count progress shows people figures, which this company keeps for administrators.Only administrators can open Count progress while the people figures setting is on. Ask an administrator.
The period starts after it ends. Choose a start date on or before the end date.In Custom, the From day is after the To day.
The first day is after the last day. Change one of them to see the figures.Count progress says this under the dates as soon as the Custom From day is after the To day. Change one of them.
Hold the stock from picking is greyed out, with Your permissions don't include holding stock from picking.Your permission module does not let you mark locations count required. Give the counts out without Hold, or ask an administrator to add /api/BinApi/MarkCountRequired to a Restrictive module (or to take it off a Permissive one).
Your permissions let you give out counts but not hold stock from picking. Untick Hold, or ask an administrator.Your permission module lets you give out counts but not hold stock. Untick Hold the stock from picking, or ask an administrator to add /api/BinApi/MarkCountRequired to the module.
A location counted on the gun still shows as openIt was counted by product (that completes nothing), or as a pallet while the bin was assigned. Count it by bin from the task in My tasks.
The sheet shows 0 units and a dash for ABCThe location is empty now. The sheet shows the stock at print time.

Was this page helpful?