P4 Software
/
logisticaHQ-en
| What you see | What it means | What to do |
|---|---|---|
| No Yard folder in the menu | The module is off, or your menu does not include it. | Ask a super user to switch on Yard module (after Migrate DBs); ask an administrator to add the Yard entries to your permission module. |
| "Dock scheduling is not switched on for your company. Ask your logisticaHQ contact to switch it on." | The module is off. | A super user switches it on in Tenant details. |
| "The time zone of Warehouse [X] is not set or is not one this System can draw. Set it on the Warehouse before using the dock schedule" | The Warehouse has no usable time zone. | Set it on Setup > Warehouse > Warehouses. |
| "This Warehouse has no Dock doors on the board yet." | No active door in this Warehouse. | Open Dock doors; add doors, or switch Door is used for scheduling back on. |
| "No load type fits this truck yet. Add one in Yard > Dock load types." | No load type for this direction (and client). | Add one. A type set to Inbound and outbound serves both directions. |
| "No door can take this truck in that window. Try another time or truck type." | Every door is hatched, closed or full in that window. | Look at the hatched lanes for the reasons; try Tomorrow, a different Truck type, or check the opening hours. |
| "Door [X] is closed at [2026-11-02 14:00]: the dock is outside its opening hours or on a blackout day" | Outside the working hours, a day off, or a blackout. | Pick another time, or check Dock capacity rules and the Calendar settings. A typed opening-hours rule replaces the Calendar hours. |
| "Door [X] is already booked at [2026-11-02 10:30]" | Another truck holds the door then (turnaround included). | Press Enter again for fresh options. |
| "Door [X] does not accept [TRUCK]" | The truck is not on the door's or group's list. | Add the type to the door's Allowed equipment types, or use another door. |
| "Door [X] does not accept [TRUCK]: it needs a ground-level door" (or "a dock-height door") | The truck needs another door style. | Use a door of that style, or change the door's Dock door style. |
| "Door [X] does not accept [TRUCK]: it is longer than the [28] ft the door takes" | Door length limit. | Another door, or correct the limit. |
| "Door [X] is not temperature controlled, and load type [Y] needs a cold door" | A cold load type on a dry door. | Mark the door Temperature controlled door, or use a cold door. |
| "Door [X] does not allow hazardous goods, which load type [Y] carries" | Hazmat load type. | Mark the door Door accepts hazmat, or use another door. |
| "Door [X] does not take Receiving appointments" (or "shipping") | The door or its group works only the other direction. | Change Dock door direction, or use another door. |
| "Door [X] (group [G]) is not in a dock group that load type [Y] works" | The load type has an Allowed dock groups list. | Add the group to the list, or move the door into one of them. |
| "Door [X] has no dock group, and load type [Y] works only certain groups" | The load type has an Allowed dock groups list and the door is in no group. | Put the door in one of the groups on the list. |
| "Choose the equipment type that is coming: the dock settings require one on every appointment" | The company requires a Truck type. | Pick one. |
| "Enter the carrier that is coming" / "Type the carrier before booking." | No carrier name. | Type it. |
| "The carrier Email [X] is not one valid address. Enter a single address such as dispatch@carrier.com, or leave it empty" | The Carrier Email box holds something that is not one address. | Type one address, or clear the box; Enter takes you to the box. |
| "The purchase order [X] is already booked on appointment [Y]: cancel that appointment first" | The document already has an active appointment. | Move that appointment instead, or cancel it first. |
| "The Truck Load [X] is part of master load [Y]: book the master load instead" | A child load cannot be booked alone. | Book the master load. |
| "The Truck Load [X] is part of LTL load [Y], so it cannot be booked on its own: set its dock door on the LTL load" | A load inside an LTL load takes its door from that load. | Set the dock door on the LTL load. |
| "Appointment [X] is at the gate and can no longer be moved" (also "at the door", "finished", "a no-show", "cancelled") | A truck that has arrived cannot be moved. | Leave it where it is. |
| "Appointment [X] is finished, so this step cannot be done. Refresh the dock schedule" (also "scheduled", "at the gate", "at the door", "waiting to be confirmed", "a no-show", "cancelled") | The step is not allowed from the truck's state. | Refresh the board and check the truck's state; steps go forward only. |
| "Appointment [X] was moved while this was saving - try again" | Someone else changed it a moment ago. | Reload the board and try again. |
| "Door [X] is being booked or changed by someone else right now - wait a few seconds and try again" | Two people booking at once. | Wait a few seconds and press Enter again. |
| "Document [X] is being booked by someone else right now - wait a few seconds and try again" | Two people booking the same document at once. | Wait a few seconds and press Enter again. |
| "The appointment number was taken by another booking saved at the same moment - try again" | Two bookings minted the same number at once. | Try again; a fresh number is used. |
| "The appointment number, date and dock door of this purchase order are managed by appointment [X]. Move the appointment on the dock schedule to change them" | An active appointment owns those fields. | Move the appointment. |
| "Appointment [X] was booked with no carrier Email. Read the appointment number to the carrier, or print the gate pass" | Email carrier on an appointment booked with no address. No screen adds one afterwards. | Read the number to the carrier or print the gate pass; next time fill in Carrier Email when you book. See "The gate pass and the carrier Email". |
| "Dock scheduling Setup is changed by Warehouse staff. Ask your Warehouse contact to make this change." | A client user tried a Setup change or a delete that runs into dock rows. | Ask the Warehouse. |
| "Dock door [Door 4] has [2] active appointment(s). Move or cancel them on the dock schedule, then switch the door off." (also "... then move the door to the other Warehouse."; for a group: "Dock group [North wall] has [2] active appointment(s) on its doors. Move or cancel them on the dock schedule, then switch the group off.") | A truck is still coming on that door or group. | Move the trucks to another door or cancel them, then save again. |
| "Dock group [Old bay] is switched off, and dock door [Door 4] has [2] active appointment(s). Move or cancel them on the dock schedule, or pick a group that is switched on." | A door that holds trucks that are still coming was moved into a group that is switched off. | Pick a group that is switched on, or move or cancel the trucks first. |
| "Dock door [X] has [2] active appointment(s) and cannot be deleted. Move or cancel them on the dock schedule first." | A delete of a door or group with trucks still coming. | Move or cancel them; or switch the door off once none is coming. |
| "Equipment type [X] is on [2] appointment(s) and cannot be deleted. Switch off "Equipment type is active" instead, so the old appointments keep their type." (and the same for doors, groups, load types, Zones, Clients, Warehouses and Carriers) | Something in use cannot be deleted. | Do what the sentence says. It names the switch you see: Equipment type is active, Dock group is active or Door is used for scheduling. See "When a delete is refused". |
| The "Closest to ..." reason never shows | No travel times, or no zone to aim at. | Fill Zone travel times on the doors and set the load type's Receiving zone (or a Staging zone for shipping). |
| The same door every time / always the earliest time | The forklift weight is 0, or no travel times. | Check How much a minute of forklift travel ... counts. |
| I changed an order's appointment date and it came back | The appointment owns it. | Move the appointment. |
| The bar shows 10401, not APT-0010401 | Bars show the digits of the number to fit one hour. | Hover for the full number. |
Clock-change days. On the two days a year when the clocks change, bookings are stored correctly: a time in the hour that repeats is read as the first pass (so the second pass cannot be booked), and a time in the hour that is skipped moves forward. In the US the clocks go back on Sunday 1 November 2026. The board can look odd on such a day: the repeated hour has a single column, and a time in an hour your own computer skips can be drawn an hour late if your computer is in a different time zone from the Warehouse. This has not been checked on a real clock-change day. Check the numbers in the panel, not the drawing.
One day at a time. The board is a day view; there is no week view yet.
The crew limit never blocks. It warns, ranks and drives the Improve flow, but a booking over the limit is accepted.
Booking needs a document. A truck with no purchase order, pick ticket, Truck Load or Master Truck Load cannot be booked from the panel. Customer Returns cannot be booked, and a Truck Load inside a master load or an LTL load is not booked on its own.
Stored for later, changing nothing yet: the Carta Porte fields and Equipment sequence on an equipment type, and any Dock capacity override row saved earlier.
Options are not renewed by the clock. Options left on screen are asked again whenever the board changes, but a long pause can leave a time that has since passed; press Escape and search again.
Not in this release: the carrier's own booking link and portal, driver check-in, yard spots and a yard board, a week view, and cross-dock suggestions. No date is promised for any of them.
Was this page helpful?