Skip to content
P4 Software P4 Software / logisticaHQ-en

Add these docs to Claude

Ask Claude questions about these docs. Claude reads the published pages and links you back to them. Copy this address:

https://p4-software.opendocs.page/mcp

In claude.ai or Claude Desktop: open Settings, then Connectors, choose Add custom connector and paste the address.

In Claude Code, run:

claude mcp add --transport http docs https://p4-software.opendocs.page/mcp

Rack limits and pallet types

Rack limits and pallet types
← Back to Zones

Applies to: logisticaHQ tenants, from version 2.57.0

Roles required: administrators to set limits and accepted pallet types; anyone who moves stock sees the checks

Overview

A rack position can only take so much weight, and an aisle built for US pallets cannot take a European one. logisticaHQ now checks both whenever stock or a pallet goes into a bin, tells the person why a move is refused, and names Bins that would fit.

License plates also show their weight, cube, length, width and height, worked out from the Products on them.

License plate weight and size

Open a license plate's details. Its size is calculated:

Value How it is worked out
Weight The Products on the plate (scanned weight for catch-weight Products, else the pack's weight, else the unit weight), plus the empty pallet.
Cube The Products' size.
Length x Width The pallet's footprint (48 x 40 in when the plate has no pallet type; change it in the settings).
Height The pallet's deck plus the Products stacked on its footprint.

A value typed on the plate still wins and is not marked Calculated; Use calculated goes back to the worked-out one. Products with no weight or no size are listed under the values, so a light total is never trusted blindly. When a typed weight is more than 10% away from what the Products add up to, the screen says the typed weight looks out of date.

Maximum weight of a bin

  1. Open Setup > Warehouse > Zones and the zone of your racks. Switch on Rack storage (in the Rack and pallets card).
  2. Every bin of a rack-storage zone can then hold at most 2,500 lb, unless you set your own:

The most specific value wins: bin, then zone, then Warehouse, then the company setting. Zones that are not rack storage (Staging, dock, Receiving) have no limit unless you type one on the zone or the bin. Bin details shows the limit, where it comes from, and how much the bin holds now.

Pallet types an aisle accepts

Switch on Use Pallet Types first (Setup > System > Configuration). Fulfillment > Setup > Pallet types > Add the standard types creates CHEP U.S. standard (48 x 40 in, the default) and EUR (1200 x 800 mm).

  • On a zone, choose its Accepted pallet types. Empty means any pallet.
  • On the Bins list, tick Bins (for example every A-03 bin) and use Set accepted pallet types: the zone's list, any pallet, or a list of their own. Bin details does the same for one bin.

When a move is refused

The message says what is wrong and where the load can go instead, for example:

Bin A-03-02 can hold 2,500 lb. It holds 1,840 lb now; with this pallet (920 lb) it would hold 2,760 lb. Bins that fit: A-03-04, A-05-01, B-01-02.

When a bin has its own list of pallet types, a wrong-pallet refusal names the bin, for example Bin A-03-02 takes CHEP U.S. standard pallets, not its zone.

Administrators can put it there anyway by giving a reason. The reason is kept in the Audit, and the bin shows that it is over its limit, or holds the wrong pallet, until that is fixed.

Never refused: counts, cycle-count approvals and inventory Adjustments. They record what is really on the shelf.

Receiving: the pallet a load arrives on

When Receiving creates a new pallet, it starts on the product's pallet type, else the vendor's Usual pallet type (on the vendor), else the default type. The Handheld will let the receiver confirm or change it in its next version; until then the pre-filled type is kept. You can change a plate's pallet type on License plate details.

Rack weight: what counts

Stock of a product with no lot, serial, expiry or pack size counts its weight on license plates and in Bins (before version 2.57.3 it weighed nothing, so a bin could read as only its empty pallets and take in more than it can hold). Plate weights, the Bins grid on Zone details and every rack check include it.

When Receiving puts stock onto a new plate, the pallet's own weight counts together with the stock, the same weight the plate shows once it exists. Before 2.57.3, a 200 lb bin could take 200 lb of stock plus the pallet under it.

Zone details

Open Setup > Warehouse > Zones and click a zone's code. The page has, from top to bottom:

Part What it shows
Header The zone code with chips: its type (Storage, Staging, Quarantine or Production area), its handling (By product or By LPN), Rack storage with its limit when the zone is a rack, and Client: [name] when it is reserved for a client. The description is under it. Changes, Refresh and Update are at the right.
Tiles Bins, Bins in use (with the share), Heaviest bin (its load, its code and its share of the limit) and Need attention (Bins over limit and Bins with the wrong pallet, or All clear). If the figures cannot load, the tiles are hidden and the rest of the page works.
Cards Zone, Zone type, How stock is stored, What one bin may hold, Rack and pallets, Size of a bin and, for administrators, Client.
Bins Every bin of the zone with its Load against its Limit (a bar, red when over), its Pallet types (with wrong pallet when the pallet on it is not accepted), its Contents and Last counted.

Change the settings and click Update. The Client choice is saved the moment you make it.

Above the Bins grid: Find a bin, Generate Bins, Generate by name, Print labels, Set accepted pallet types (only when your company uses pallet types) and Delete (administrators), which deletes the ticked Bins.

The Rack and pallets card holds Rack storage, Max weight (empty: the Warehouse or company setting), Weight unit and, when your company uses pallet types, Accepted pallet types (empty: the zone takes any pallet type).

Zone types

A zone has one Zone type, chosen with one button on the Zone type card:

Zone type Meaning
Storage Normal stock, picked and allocated.
Staging Pallets waiting between the floor and the dock. New in version 2.57.0.
Quarantine Held stock that is never allocated.
Production area Stock consumed by Production orders, with an automatic source bin. Offered for By product Zones only.

Deleting a zone

Deleting a zone also deletes its Empty bins. It is refused, naming the Bins, while any of them still holds stock, license plates or Totes, or is used by a kit, a load or a production order. Before version 2.57.0 a zone with Bins could not be deleted and showed a general error.

Was this page helpful?