P4 Software
/
logisticaHQ-en
The Order Matrix is a self-service pivot of your open orders. You choose what goes down the side (the rows) and what goes across the top (the columns), and every cell shows how many orders, lines and units sit at that crossing. A header above the matrix summarizes all open orders at a glance.
A number is a count of open packslips, and clicking it opens something you can act on. A plain click on a number in the matrix opens a side panel with that cell's figures; from the panel, Open the Pick tickets opens the Pick tickets list filtered to exactly the orders behind the number. The totals (row, column and grand) are links to the Pick tickets list.
orders (lines/units). Orders is the number of distinct packslips, lines the sum of their line counts and units the sum of their quantities. For example 107 (119/323) is 107 orders holding 119 lines and 323 units.The header always describes all open orders. It ignores the matrix's own rows, columns and filters, so it does not change when you change the Setup below it. As soon as at least one filter has been applied (a filter counts once you press Reload, not while you are still typing it), a short line above the header says so: "All open orders: the filters below do not apply here." The attention rows (name, hint, count and bar) are all clickable and open the Pick tickets list on that state. It is refreshed when the page opens and every time you press Reload. If a card cannot be built (for example your Tenant lacks a dimension it needs, or its request failed), that card is simply left out, without an error message; if no card can be built, the whole header is hidden.
| Element | What it shows | How it is computed |
|---|---|---|
| Doughnut | One slice per state, with the total number of open orders in the centre. | Orders are summed per state. The six biggest states each get a slice; every smaller state is grouped into one slice named after the largest state inside it, for example Waved · other (a group with a single state just shows that state). |
| Legend | Each slice's name and count (maximum seven rows). | The same figures as the doughnut, written out so they line up and can be read by a screen reader. |
| Caption | 13,344 lines · 87,134 units · 129 Customers · 13 Clients |
Lines and units are totals over all open orders. Clients is the number of Clients with open orders. Customers is the number of distinct Customers; if that figure cannot be obtained, the caption simply leaves "Customers" out. |
A preset saves your whole Setup: rows, columns, Hide blanks, Pre-select rows and every filter.
| Control | What it does | What happens next |
|---|---|---|
| Preset picker (top right, shows the current preset's name, or Default) | Opens a list of presets with a Search presets box. Your own presets come first, then Shared ones (older presets everyone sees). | Choosing one replaces the whole page state and reloads the matrix. Choosing Default Returns to Customer code by State with no filters. |
| Save as preset | Asks for a name and saves the current Setup as your own preset. | A name that already exists is overwritten. The list is limited to 50 presets per user; the server refuses the 51st with a message asking you to delete one. Shared presets cannot be changed or deleted. |
| Delete preset (the X, only visible when one of your own presets is selected) | Asks for confirmation, then deletes the preset. | The matrix stays as it is and the picker Returns to Default. Never shown for Default or a Shared preset. |
| Search presets | Narrows the list as you type. | "No presets match." if nothing fits. |
If a preset's stored Setup cannot be read, the screen keeps your current Setup, does not select the preset, and shows "This preset could not be read."
Changing Rows, Columns or pressing Swap axes also Returns the picker to Default, because the Setup no longer matches the saved preset.
| Control | What it does | What happens next |
|---|---|---|
| Rows | Chooses the dimension down the side (Client, Customer code, State, Warehouse, Shipping, Carrier, Wave, Route, dates, and so on). | The matrix reloads at once. |
| Columns | Chooses the dimension across the top. | The matrix reloads at once. |
| Swap axes | Exchanges rows and columns. | The matrix reloads and the cell panel closes. When State ends up on the rows, its values are drawn as coloured pills in the row heads. |
| Hide blanks (switch) | Hides rows and columns that hold no orders. | Never reloads: it only changes what is drawn. Totals still cover every order. The text beside it says "N empty rows or columns hidden", "showing empty rows and columns too" (switch off, and the data has blanks) or "nothing empty to hide". The cell panel closes when you flip it. |
| Pre-select rows (switch) | Makes the links in the matrix open the Pick tickets list with every row already ticked, ready for a bulk action. | Never reloads. It adds &s=1 to the links. The Pick tickets list ticks at most 2,000 rows. |
Date dimensions group by day and number dimensions group in bands. Next to the title, the caption Each cell: orders (lines/units) reminds you how to read a cell.
Filters narrow the matrix (not the header). Edits are not applied until you press Reload, so typing does not trigger a request per keystroke. The heading counts the complete filters: "· 2 active, edits apply on Reload".
| Control | What it does |
|---|---|
| Add filter | Adds an empty row (first dimension, operator is). It filters nothing until it has a value. |
| Field | The dimension to filter on. Changing it resets the operator (if the new field does not take it) and clears the values. |
| Operator | Depends on the field: text fields offer is, is not, is one of, contains, is blank, is not blank; number fields is, is not, is one of, between, is blank, is not blank; date fields is, between, is blank, is not blank. |
| Value | One box for is, is not, contains; for is one of, several values separated by commas; for between, two boxes (From and To; dates use a date picker); a day picker for a date is; nothing for is blank / is not blank. Pressing Enter in a value box reloads. |
| Remove filter (X) | Removes the row and reloads. |
| Reload | Applies the filters and refreshes the matrix and the header. Disabled while loading. |
Rules and limits:
(lines/units) is in grey beside it. An empty crossing shows an en dash (–).0.05 + 0.37 × √(orders ÷ largest), never more than 0.42, where largest is the biggest cell currently visible. So the darkest cell is always the busiest one on screen, and even one-order cells are tinted.A plain click on a number (or Enter on it) opens the panel on the right of the matrix; below the matrix on narrow windows. A click with Ctrl, Cmd or Shift, or a middle click, does not open the panel but follows the link normally (for example in a new tab).
The whole Setup (rows, columns, switches and filters) is kept in the browser address (?f=...). Copy the address to share the exact view; opening it restores the Setup. Saved presets store the same thing. The cell selection is not part of the address.
Export to xlsx (top right; disabled until a matrix is shown) downloads exactly what you see: the same rows and columns (hidden blanks are not exported). The first line is the header, in bold; each row ends with its total; the last line is the totals. A cell is written as text, orders (lines/units). A row whose total is zero is written blank, matching the dash on screen (an empty total column is blank too). The file is named Order Matrix - <Rows> x <Columns>.xlsx; the worksheet has the same name, cleaned of the characters Excel does not allow ([ ] : * ? / \) and cut to 31 characters.
| What you see | What it means | What to do |
|---|---|---|
| The page is empty and says "The matrix could not be loaded." | The list of dimensions or presets could not be read. | Reload the page; if it persists, tell your administrator. |
| "Too many values: the matrix would have more than 500 rows..." above the matrix | The chosen axes have more than 500 values. | Add a filter, or choose a coarser dimension. |
| "There are no open packslips for these filters." | Your filters match nothing. | Remove or loosen a filter and press Reload. |
| A carrier note: "N orders have no carrier" | Orders were created with no carrier chosen. | Check the Shipping rules for the Clients involved. |
| "This preset could not be read." | The preset's stored Setup is damaged. | Pick another preset and save the Setup again under the same name. |
| The header is missing, or a card is missing | A request for it failed or your Tenant lacks a dimension it needs. | Press Reload. The matrix works without it. |
order-matrix-01-Overview.png: the whole screen with a matrix.order-matrix-02-header.png: the four KPI cards.order-matrix-03-presets.png: the preset picker open with the search box.order-matrix-04-filters.png: two filter rows, one with a range.order-matrix-05-matrix.png: the heat-shaded matrix with state pills.order-matrix-06-panel.png: the cell panel beside a selected cell.Screenshots are pending: they could not be captured without access to a running Tenant.
Was this page helpful?