Skip to content
P4 Software P4 Software / logisticaHQ-en

Add these docs to Claude

Ask Claude questions about these docs. Claude reads the published pages and links you back to them. Copy this address:

https://p4-software.opendocs.page/mcp

In claude.ai or Claude Desktop: open Settings, then Connectors, choose Add custom connector and paste the address.

In Claude Code, run:

claude mcp add --transport http docs https://p4-software.opendocs.page/mcp

Yard management

Yard management is the logisticaHQ Yard module. It gives every truck a door and a time, and runs the day at the dock on one board.

Applies to: logisticaHQ tenants on which a super user has switched the Yard module on (release 2.60.10, dock scheduling) Roles required: a super user switches the module on; Warehouse staff (Users who are not tied to one client) whose menu includes the Yard entries book, move, run and cancel trucks and change the Setup; a user tied to one client sees and books only that client's trucks and changes only that client's load types; everybody else is refused Regulatory references: none. Equipment types have two optional Carta Porte fields that are stored for later; nothing in this release prints or sends them.

Overview

Dock scheduling gives every truck a door and a time before it arrives, and gives the person on the phone a number to read out. A carrier calls, the desk finds the purchase order or pick ticket, reads the three best doors and times, presses Enter, and says the appointment number. The same board then runs the day: who is coming, who is waiting, who is at a door, who is late.

Three ideas run through everything:

  1. A booking always has a door and a document. In this release every appointment is made for at least one purchase order, pick ticket, Truck Load or Master Truck Load, and always on one named door.
  2. The server decides, the screen explains. Which door can take the truck, whether the dock is open, whether the door is free: the server checks every booking and every move, and a refusal says in plain words what is wrong. Nothing is double-booked, even when two people book at the same moment.
  3. The advice is advice. The three options are ranked by how long the carrier waits and how far the forklifts have to drive. The crew limit per hour only warns: the board shows the hour as busy and the option carries a warning, but the booking is accepted. You can still drag a truck anywhere the server accepts.

The words to know:

  • Appointment: one truck's visit: a door, a start, an end, a carrier and the documents it carries or collects. It has a number such as APT-0000012 (the prefix is a setting).
  • Receiving and shipping: the two directions. Receiving trucks bring goods in (Purchase orders). Shipping trucks take goods out (Pick tickets, Truck loads, Master truck loads). The board shows an arrow before the carrier: down for Receiving, up for shipping.
  • Dock door: a door on the Dock doors screen. With the module on, each door also says which direction it works, what style it is, which trucks it takes and how far it is from each zone.
  • Dock group: doors that share a rule, such as "North wall". A group can have a crew limit per hour.
  • Equipment type: a kind of truck or trailer: dry van 53', reefer 53', flatbed. (This is not the Labor module's equipment, such as forklifts.)
  • Dock load type: the kind of visit: "Palletized Receiving", "Reefer shipping". It decides how long the truck stays and which doors may take it.
  • Slot: the smallest step of the board, 15 minutes by default. Appointments start and end on slots.
  • Turnaround: the time a door is held after a truck leaves, 15 minutes by default, to clear the trailer before the next one backs in.
  • Crew load: how many trucks are at the dock at once in one clock hour, shown against the group's Crew limit per hour.
  • Option: one of the three suggestions for a door and time, numbered 1 to 3 on the panel and on the board.
  • Hatched door: a door that cannot take the truck in hand. The reason is written on it.

Navigation

Where What it is
Yard > Dock schedule The board and the booking panel. This is the screen used all day.
Yard > Trailers on site Every trailer in the yard, what is on it and how long it has left (Drop trailers, see "Drop trailers").
Yard > Gate desk Check trailers in and out at the gate.
Yard > Tell the carrier Trailers that are ready to be collected, and the notice to the carrier.
Yard > Carrier terms A carrier's own free time and time to collect.
Yard > Equipment types The kinds of truck and trailer.
Yard > Dock groups Doors that share a rule or a crew limit per hour.
Yard > Dock load types How long each kind of visit takes and which doors it may use.
Yard > Dock capacity rules Opening hours and closed days (blackouts).
Yard > Dock appointments A read-only list of every appointment, newest first.
Setup > Warehouse > Dock doors The doors. With the module on, the door dialog has a Dock scheduling part.
Setup > System > Configuration The tuning settings (see "Settings").
Receiving > Calendar In the menu only while the Yard module is off. A saved link still opens it, and dragging a purchase order that an appointment covers moves the appointment.

A person whose menu is built from a permission module sees the Yard entries only if that module's menu includes them. The menu of a module made before this release does not contain the Yard entries: add them to the module if a person does not see them.

Everything above works on the Warehouse clock. The board, the options and the sentence read to the carrier use the time zone of the Warehouse, never the zone of your computer, so a desk in another country books the right hour.

In this section

Was this page helpful?